New Arrivals/Restock

2.5Mpa 25KG Manual Hydraulic Water Pressure Test Pump Pipeline Tester Tool Carburetor Pressure Tester Mrisata

flash sale iconLimited Time Sale
Until the end
10
07
57

US$24.59 cheaper than the new price!!

Free shipping for purchases over $99 ( Details )
Free cash-on-delivery fees for purchases over $99
Please note that the sales price and tax displayed may differ between online and in-store. Also, the product may be out of stock in-store.
Used  US$16.40
quantity

Product details

Management number 211794393 Release Date 2026/04/04 List Price US$16.40 Model Number 211794393
Category

Features: The outer box is made of high-quality aluminum, which is more durable Large dial, clear reading, fashionable and generous. Suitable for water, or hydraulic oil as a support, for a variety of pressure vessels, pipes, valves and other pressure tests 0.8MPa-1.0MPa. (Tap water 0.1 MPa 1 kg pressure) This water pump is easy to install and use. Specifications: Material: Aluminum Outer diameter of pressure column: 2.8 cm/1.10 inches. Pressure: 2.5MPa Flow rate: 12 ml/time. Colour: yellow Weight: 2090 g How to use? (Instructions) 1. Connect the water hose to the water hose 2. Turn off the switch when the hose is filled with water and the air is discharged 3. Fill the water tank, then tilt the plate up and down, start testing the pressure 4. When the pressure gauge readings reach the pressure need, you can stop the pressure; 5. After stopping the pressure, if the pressure gauge does not fall on the pressure gauge, it can prove that the pressure performance of the pipe is good, on the contrary, it proves that the measured pipe sealing performance is not good, The specific steps of the test pressure are as follows: 1. Hot and cold water pipes connected together with hot and cold water to form a circle, in a tube, and test the pump connected to any outlet can be the pressure pointer is 0 pressure. When all the water pipes are fully welded before you can test the pressure, in the pressure before closing all the caps, close the water inlet valve. 2. When measuring pressure, shake the jack until the pressure gauge needle shows about 0.9-1.0, that is, the current pressure is 3 times the

  • Instructions for use 1. Connect the water hose to the water hose 2. Close it when the hose is filled with water and the hose is discharged 3. Fill the water tank, then tilt the plate up and down, start testing the pressure4. When the pressure gauge readings increase as needed pressure, folanda test, you can stop the pressure.
  • pressure test pump, APPLICABLE WATER PRESSURE RANGE 0.3 MPa normal tap water pressure, 10000 psi battery hydraulic pump, high rise residence 0.4 MPa, pressurized water pipe pressure gene to 0.8 MPa 1.0 MPa. Tap water pressure 0.1MPa 1kg
  • 【Specifications】 Material: Aluminum Pressure column outer diameter: 2.8 cm Pressure: 2.5 MPa Flow rate: 12 ml time Color: yellow Weight: 2090g
  • 【Simple operation】Instructions This water pump is easy to install and use. First, connect the water hose to the water pipe. Close it when the hose is filled with water and the hose is unloaded. Fill the tank with water, then tilt the plate up and down. When the pressure gauge readings reach the pressure need, you can stop the pressure.
  • 【Widely Applicable】Suitable for water or hydraulic oil as a medium, for a variety of pressure vessels, hoses and other pressure tests. This water pump is easy to install and use, the pressure washers
Color Yellow
Brand Name Mrisata
Unit Count 1.0 Count
Item Weight 1 Kilograms
Manufacturer Mrisata
Model Number Mrisataknyhr38xt4
Power Source Battery Powered
Material Type Aluminum
Product Style Classic
Item Type Name Metering pumps

Correction of product information

If you notice any omissions or errors in the product information on this page, please use the correction request form below.

Correction Request Form

Product Review

You must be logged in to post a review